[TUT] How To Downgrade From Kitkat To Jellybean [Phantom][Q1000][OHD.2]
FILES REQUIRED
1.SP Flash Tools===> http://bc.vc/oaS1Jf
2.XOLO Q1000 Stock Rom [JB]===> http://bc.vc/UaI2sn
3.Driver===> http://bc.vc/jTv3aJ
HOW TO INSTALL COM DRIVER (SKIP IF YOU HAVE IT ALREADY INSTALLED)
1.Switch off the phone.
2.Go to Device Manager on your computer.
3.Connect your phone to the PC via a cable, you will hear a beep and you will see the driver come up in the
4.Unkown Devices, quickly double click on it as you have 5 seconds and update driver by selecting the downloaded driver folder.
5.To check if you successfully installed it, check under COM ports in device manager and you should see no yellow hazard triangle.
PROCEDURE
1.Extract the Firmware Folder (The rest of the folders in the ZIP are meaningless).
2.Open SP Flash Tools and scatter load the XOLO scatter file.
3.Set it to Firmware Upgrade (Though we are downgrading).
4.Make sure your phone is SWITCHED OFF and NOT YET CONNECTED to the PC.Click on the Download button and quickly connect you cable back to the phone.
5.The process will take around 5 minutes, you will see a green tick at the end.
#Phantom Sound Patch For [JB]
CREDITS:-
